Shower Door Hardware

Home > Product > 4. Shower Door Hardware > 4-4. Wall to Glass Hinge > Standard Beveled Silhouette – H Type Back Plate
Standard Beveled Silhouette – H Type Back Plate

Standard Beveled Silhouette – Wall to Glass Shower Hinge (H Type Back Plate) Specifications:

    • Solid Brass Drop Forged Construction
    • Stainless Steel Reversible Pivot Pin with 0 degree and 5 degree positive stop
    • Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) tempered glass
    • Stainless Steel Hardened coil springs
    • Hinge design to fit industry standards templates
    • 90 degree opening angles
    • Accessories – gaskets/screws, allen wrench, template

    Standard Reversible Pivot Pin

    Each Hinge contains a Reversible Pivot Pin. The Hinge comes with the Pivot Pin set for regular closing position (wall meets door at 90 degree). The opposite side of the pin has been machined at 5 degree, and will provide tighter door closure (85 degree) by simply rotating the Pivot Pin half-way around.

    Custom Pivot Pin

    Custom Pivot Pins are available for “off-angle” installations. If the Standard Reversible 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a custom Pivot Pin. Used For Standard Wall to Glass installation. Available with full back plate and short back plate. Short back plate allows the glass to be placed closer to the wall.
    SHB037H-CP Chrome
    SHB037H-BN Brushed Nickel
    SHB037H-MTB Matte Black
    SHB037H-ORB Oil Rubbed Bronze