PRODUCT

Commercial Door Hardware

Home > Product > 5. Commercial Door Hardware > 5-1. Exit Device > Panic Exit Devices Rim Type-TH7100EDTBAR
Panic Exit Devices Rim Type-TH7100EDTBAR
TH71OOEDTBAR Specifications
  • MATERIAL : MATERIAL: Push bar -Steel pressed or stainless steel pressed Head Cover - Steel pressed or stainless steel pressed Spring- Stainless steel
  • LATCH BOLT: 5/8" throw, stainless steel
  • DEAD LATCH BOLT: 9/16", steel
  • STRIKE: For 5/8" stop
  • PROJECTION: 2-1/2" maximum, 1-15/16" pressed
  • REVERSIBLE: Non-handed , reversible for all functions and trims
  • FOR DOOR: 1-3/4 thick of wood or metal door
  • DOOR WIDTH: 3'standard for door width of 29" to 36", 4'standard for door width of 41" to 48"
  • STILE: 4-1/4" minimum
  • MOUNTING HEIGHT: 40-5/16" from CL to finished floor recommended
  • MOUNTING: Furnished standard with sheet metal & machine screws or SNB as option
  • CYLINDERS:For trim, knob, lever & thumb-piece type "Schlage C" key way
  • DOGGING: 1/4 turn, hex key dogging on non-fire labeled device
  • UL LISTED: For "Panic Hardware" and "UL" eled (3 hours) fire exit hardware
  • ANSI STANDARD: A156.3 Grade 1
  • OPERATION: Inside by slight pressure on any point of the push bar all time • HEAD COVER: 8-1/2"x2-3/4"x2-1/2"(216mmx68.3mmx62mm) or 6--13"x2-3/4"(160mmx68.3mmx62mm)
  • STANDARD FINISHES: US32D (or other available finishes upon request & discussion)